Pumping Tests

    Pumping Tests are essential in order to determine weather the constructed well is able to produce the required amount of water in a long term or not.

  Upon completion of the well construction and development, the driller will install the submersible pump with discharge piping of sufficient size and length to conduct the pumping test. All equipment necessary for measuring the rate of flow, discharge, drawdown and recovery such as water flow meter, electrical water level meter, stop watch, valves and etc. will be ready and adjusted before running the pump.

       A report will be prepared and submitted after site measurements, which shall include water drawdown, well specific yield and pump selection calculations per demand yield.